 |
Ex-proof valves
Explosion-proof valves, on-off or proportional,
for use in potential explosive environments for
presence of gas or flammable dust.
Solenoids are of original design, integral and
consistent to the valves.
At choice type-tested and certified to:
- ATEX 94/4/CE standard Ex
- UL 1002 American standards
- Gosgortehnadzor Russian Certification
Stainless steel valves
A new "X" line of directional and pressure
controls, in stainless steel execution for
corrosive environments and special fluids.
Rugged inoxidizable design, suitable for use
with mineral oils, water glycol, special syntetic
fluids or just pure water.
- at request, certifications as above
Safety valves
Safety valves are specifically designed to
ensure safety, they are equipped with specific
devices for monitoring spool position and the
relevant hydraulic status
Used to cut off, in case of emergency or
safety situation, the line of hydraulic power to
an actuator
Intrinsically safe valves
"Intrinsically safe" specification is based on the
principle of limiting the energy of electric
circuits in environments with hazardous
atmospheres.
To limit the max input current, valves must be
powered through specific "safety barriers".
- pressure to 210 bar
- flow to 20 l/min (pilot valve)
Leak-free valves & cartridges
Leak free solenoid valves, subplate or screw-in,
two-way, poppet style: normally used to cut off
the hydraulic power supply line.
Currently available in "normally closed"
configuration, they open the flow when their
solenoid is energized. |
|
 |
