Subject

UNI EN ISO 9001:2008
Quality Management System certification

CR1

ISO 14001:2004
Environmental management system certification

CR2

BS OHSAS 18001:2007
Health & Safety management system certification

CR3

ATEX 94/9/CE Production Quality Assurance Notification - QAN
notification of the production quality system according to Annex IV of the Directive 2014/34/EU

CR4

ATEX 94/9/CE EN 13463-1, EN 13463-5, EN 13463-6, EN 13463-8
Hazard locations vane pumps type PFEA and variable piston pumps type PVPCA for surface plants with gas, vaporous, mists and dust Zone 1, 2, 22 and 22
Ex II 2/2 GD cbk IIC TX IP66

CR5

ATEX 94/9/CE EN 13463-1, EN 13 4635, EN 13463-8
Hazard locations cylinders type CKA and servocylinders type CKAM for surface plants with gas, vaporous, mists and dust – Zone 1, 2, 22 and 22
Ex II 2/2 GD ck IIC TX IP66

CR6

ATEX 94/9/CE EN 60079-0, EN 60079-1, EN61241-0 and EN61241-1
Hazard location solenoids for surface plants with gas, vaporous, mists and dust - Zone 1, 2, 21 and 22, ON-OFF, proportional and stainless steel execution:
Ex II 2G Ex d IIC T6,T4,T3 Gb
Ex II 2D Ex tb IIIC T85°C, T135°C, T200°C Db IP67

CR7

ATEX 94/9/CE EN 60079-0 and EN 60079-1
Hazard location transducers for surface plants with gas, vaporous, mists - Zone 1 and 2 LVDT positioning transducer
Ex II 2G Ex d IIC T6,T4,T3 Gb
Ex II 2D Ex tb IIIC T85°C, T135°C, T200°C Db IP66/IP67

CR8

ATEX 94/9/CE EN 60079-0 and EN 60079-1
Hazard location solenoids for mines and surface installations with methane and coal dust ON-OFF and proportional execution
Ex I M2 Ex d I Mb

CR9

ATEX 94/9/CE EN 60079-0 and EN 60079-1
Hazard location proportional solenoids with integral digital electronics for surface plants with gas, vaporous, mists - Zone 1 and 2
Ex II 2G Ex d IIC T6, T5 Gb

CR10

ATEX 94/9/CE EN 60079-0 and EN 60079-11
Intrinsically safe solenoids for surface plants with gas, vaporous, mists - Zone 0, 1, 2, 20, 21 and 22 ON-OFF execution
Ex I M2 Ex ia I Mb / Ex ib I Mb Tamb.: -20°C ÷ +60°C
Ex II 1G Ex ia IIC T6 Ga or II 1G Ex ia IIB T6 Ga or II 1G Ex ia IIA T5 Ga
Tamb.: -20°C ÷ +60°C or -40°C ÷ +60°C

CR11

IECEx Certification scheme for Explosive atmospheres IEC 600079-0, IEC60079-1, IEC 600079-31
Hazard location solenoids ON-OFF proportional and stainless steel execution, for surface plants with gas, vaporous, mists and dust – Zone 1, 2, 22 and 22
Exd IIC T6, T4 or T3 Gb
Ex tb IIIC T85°C or T135°C or T200°C Db IP67

CR12

IECEx Certification scheme for Explosive atmospheres IEC 60079-0, IEC 60079-1
Explosion proof solenoids ON-OFF proportional with or without position transducer and inductive LVDT transducer
Ex d I Mb

CR13

IECEx Certification scheme for Explosive atmospheres IEC 60079-0, IEC 60079-1, IEC 60079-31
Explosion proof inductive transducer for surface plants with gas, vaporous, mists and dust –
Zone 1, 2, 22 and 22
Ex d IIC T6 or T5 or T4 Gb
Ex tb IIIC T85°C or T100°C or T135°C Db IP 66/67

CR14

IECEx Certification scheme for Explosive atmospheres IEC 60079-0, IEC 60079-1
Explosion proof solenoid valves with integral digital electronic driver for surface plants with gas, vaporous, mist - Zone 1 and 2
Ex d IIC T6 or T5 Gb

CR15

IECEx Certification scheme for Explosive atmospheres IEC 60079-0, IEC 60079-11, IEC 60079-26
Intrinsically safe solenoids operating in hazardous areas with explosive or flammable environment
Ex ia IIC T6 Ga or Ex ia IIB T6 Ga or Ex ia IIA T5 Ga
Ex ia I Mb / Ex ib I Mb

CR16

American and Canadian Standard UL 1002 & CSA 22.2
Hazard location solenoids for flammable gas or vapor - cULus listed ON-OFF, proportional and stainless steel execution
Class I Div 1 Groups C & D, Temperature class T6 and T4

CR17

American and Canadian Standard UL 429 & CSA 22.2
Recognized component mark - UR marking Coils type COI, COU, COUR, COURJ, COURK, COO, COZO, COE, COEJ, COES, COEK, CAE, CAEJ, CAES, CAEK, COZE, CAZE

CR18

EAC Ex-proof EurAsian certification (ex. ROSTECHNADZOR)
Hazard location solenoids for surface plants with gas, vaporous, mists and dust - Zone 1, 2, 21 and 22, ON-OFF, proportional and stainless steel execution
Ex d IIC T6, T4 e T3 Gb
Ex tb IIIC T85°C, T135°C,T200°C Db IP66/67

CR19

EurAsian Certification – EAC
Certification for Valves, Pipeline Fittings, Pumps, Electronic Drivers and Cylinders according to the unified TR certification system adopted in the Customs Union countries of Russia, Belarus and Kazakhstan.

CR21

PED 2014/68/UE (ex 97/23/CE)
Pressure equipment directive
Valve type CART M-3, M-5, M-6, ARE-15, ARE-20, ARE-6, ARE-15, AGAM and ARAM Standard steel and stainless steel executions

CR22

SAFETY VALVES EN 982, EN 442, EN 693 and EN 12622
Safety components according to the machine directive
Direct, piloted operated valves and cartridges with mechanical micro switch or integrated inductive proximity sensor or inductive position sensors

CR23

HYDRAULICS BLOCKS EN 12622
Directive for downstroking Press Brakes - metal forming
Standard PBAC and PBBC solutions for CNC synchronized press brakes - TÜV certified

CR24

HYDRAULICS BLOCKS EN 12622
Directive for downstroking Press Brakes - metal forming
Standard solution for bending press (not CNC) - TÜV certified

CR25

SIL compliance IEC 61508
Ex-proof direct operated solenoid valves, poppet type and spool type

CR26

SIL compliance IEC 61508
Intrinsically safe direct operated solenoid valves, spool type

CR27