Configurator

Go to catalog

CKF Servocylinder (magnetosonic)

Cilindros y servocilindros

With built-in transducer to ISO 6020-2, nominal pressure 160 bar, max 250 bar

Información técnica
B310 - Tabla
B015 - Tabla
K810 - Tabla
SP-B310 - Tabla

Hide or show technical insights to lead user in selection

CKF Servocylinder (magnetosonic)
Generalidades
Obligatorio
image

Incorporated subplates allow the direct mounting of the valves on the cylinder. For strokes shorter than 150 mm, the cylinder will be provided with suitable spacers.

Incorporated subplates allow the direct mounting of the valves on the cylinder. For strokes shorter than 150 mm, the cylinder will be provided with suitable spacers.
Subplates [10 20 30 40]
Without subplates
Subplates [10 20 30 40]
ISO 4401 size 06
Bore ø 40 ÷ 200 mm
Subplates [10 20 30 40]
ISO 4401 size 25
Bore ø 125 ÷ 200 mm
Subplates [10 20 30 40]
ISO 4401 size 16
Bore ø 80 ÷ 200 mm
Subplates [10 20 30 40]
ISO 4401 size 10
Bore ø 40 ÷ 200 mm
Bore size
Rod diameter
image

The stroke is the maximum displacement of the piston rod. Specify the desired stroke entering the value in the field provided

The stroke is the maximum displacement of the piston rod. Specify the desired stroke entering the value in the field provided
Please select a value between the range
Select a value between 50 and 2500 with step 5 and confirm to continue
image

For mounting style L and strokes shorter than 35 mm, the configured cylinder is automatically equipped with a spacer, minimum length 50 mm. Spacers length selection will be available in subsequent configuration steps.

For mounting style L and strokes shorter than 35 mm, the configured cylinder is automatically equipped with a spacer, minimum length 50 mm. Spacers length selection will be available in subsequent configuration steps.
Mounting style
Basic execution
Front round flange (Ref. ISO MF3)
Rear round flange (Ref. ISO MF4)
Fixed clevis (Ref. ISO MP1)
Fixed eye (Ref. ISO MP3)
Mounting style
Feet (Ref. ISO MS2)
Mounting style
Front trunnion (Ref. ISO MT1)
Rear trunnion (Ref. ISO MT2)
Mounting style
Intermediate trunnion (Ref. ISO MT4)
Mounting style
Front flange (Ref. ISO ME5)
Rear flange (Ref. ISO ME6)
Fixed eye with spherical bearing (Ref. ISO MP5)
Threaded holes with tie rods extended (Ref. ISO MX7)
Rear the rods extended (Ref. ISO MX2)
Both end tie rods extended (Ref. ISO MX1)
Mounting style
Front tie rods extended (Ref. ISO MX3)
Mounting style
Front theaded holes (Ref. ISO MX5)
image

Cushionings’ profiles are designed to reduce the cylinder speed before the rod contacts the mechanical stroke-end, dissipating the energy with limited pressure spikes. These hydraulic dampers also reduce mechanical shocks. The adjustable versions are equipped with cartridge valves to increase max damping energy extracted from cushionings chart in table B015 (section 7.5) or to optimize the cushioning performances in different applications.

Cushionings’ profiles are designed to reduce the cylinder speed before the rod contacts the mechanical stroke-end, dissipating the energy with limited pressure spikes. These hydraulic dampers also reduce mechanical shocks. The adjustable versions are equipped with cartridge valves to increase max damping energy extracted from cushionings chart in table B015 (section 7.5) or to optimize the cushioning performances in different applications.
Cushionings
Without cushionings
Rear FAST adjustable
Cushionings
Front adjustable
Front and rear FAST adjustable
Rear SLOW adjustable
Front SLOW adjustable
Front and rear SLOW adjustable
Rear FAST fixed
Front FAST fixed
Front and rear FAST fixed
Spacers
Without spacers
25 mm
Spacers
50 mm
Stroke: 1001 ÷ 1500
Spacers
100 mm
Stroke: 1501 ÷ 2000
Spacers
150 mm
Stroke: 2001 ÷ 2500
Spacers
200 mm
Stroke: 2501 ÷ 3000
Sealing systems
FKM + PTFE

High temperatures
Speed max: 4 m/s
Temp.: -20°C/+120°C
Fluids: HH, HL, HM, HV,
HFC, HFDR
Sealing systems
NBR + PTFE

High speed
Speed max: 4 m/s
Temp.: -20°C/+85°C
Fluids: HH, HL, HM, HV,
HFC, HFDU
Sealing systems
NBR + PTFE +
POLYURETHANE

Low friction
Speed max: 0,5 m/s
Temp.: -20°C/+85°C
Fluids: HH, HL, HM, HV
image
image
Rod end thread [F G H]
MALE rod threading
Rod end thread [F G H]
LIGHT MALE rod threading
image
image
Oversized oil ports [D Y]
Standard oil ports
Oversized oil ports [D Y]
Front oversized port
Oversized oil ports [D Y]
Front and rear oversized ports
Oversized oil ports [D Y]
Rear oversized port
Rod treatment [K T]
Chrome
NSS 200h rating 10
Hardness:
• Plating 850 ÷ 1150 HV
• Rod 20 ÷ 25 HRC (~250 HV)
Rod treatment [K T]
Chrome hardened
NSS 200h rating 10
Hardness:
• Plating 850 ÷ 1150 HV
• Rod 56 ÷ 60 HRC (~700 HV)
Rod treatment [K T]
Nickel – Chrome
NSS 1.000h rating 10
Hardness:
• Plating 850 ÷ 1150 HV
• Rod 20 ÷ 25 HRC (~250 HV)
image
image
Front Head-Oil port position[B
SIDE 1 - Base version
image
image
Front Head cushioning [E]
Without Front Cushioning
SIDE 1
SIDE 2
Front Head cushioning [E]
SIDE 3 - Base version
SIDE 4
image
image
Rear Head-Oil port position[X]
SIDE 1 - Base version
image
image
Rear Head cushioning [Z]
Without Rear Cushioning
Please select a value between the range
Select a value between 0 and 5366 and confirm to continue
Output [A V Q R S U C P]
Analog current output (4-20mA)
Digital output SSI Binary code 24 bit
Digital output SSI Binary code 25 bit
Digital output SSI Gray code 24 bit
Digital output SSI Gray code 25 bit
Output [A V Q R S U C P]
Analog voltage output (0-10V)
Cable connector [M]
Standard connector
Cable connector [M]
Cable connector right angle (90°)
Go to catalog

Product Code