Do you want to leave the configurator?The running selection will be lost.
Round heads with counterflanges to ISO 6020-1, nominal pressure 160 bar, max 250 bar
Informations techniques
Hide or show technical insights to lead user in selection
For strokes shorter than minimum stroke, the configured cylinder is automatically equipped with a spacer, minimum length 50 mm. Spacers length selection will be available in subsequent configuration steps.
Cushionings’ profiles are designed to reduce the cylinder speed before the rod contacts the mechanical stroke-end, dissipating the energy with limited pressure spikes. These hydraulic dampers also reduce mechanical shocks. The adjustable versions are equipped with cartridge valves to increase max damping energy extracted from cushionings chart in table B015 (section 7.5) or to optimize the cushioning performances in different applications.
The spacers increase the rod and piston guide to protect them from overloads and premature wear, they are recommended for strokes longer than 1000 mm in pushing working condition. The overall dimension of the cylinder increases by a value equal to the length of the spacers. For strokes longer than 3000 mm is recommended to contact our technical office. Spacers are mandatory for strokes shorter than the minimum values for mounting style “L”.
The air bleed screws allow to remove the air from the hydraulic circuit in order to avoid unwanted noise or vibrations which could cause irregular cylinder’s motion.
By changing your choice, all selections you have made will be reset.
