Press Releases

Digital electrohydraulics for injection cylinder control in plastics machinery

Digital electrohydraulic control units guarantee high quality standards not only to produce complex industrial products, but also for the small plastic objects we use every day in our homes


Precision, repeatability, fast response, and energy efficiency are the key words in plastic injection moulding. Modern control systems have evolved significantly, with particular focus on optimizing the injection cycle and achieving accurate control of the injection cylinder. Advanced digital electrohydraulic technologies, including high-performance digital pQ proportional valves and servopump systems, have dramatically improved process stability, repeatability, and shot-to-shot consistency. Fully integrated and optimized control architectures not only guarantee superior part quality, but also minimize scrap rates, reduce cycle times, and lower overall energy consumption.

Alternating pQ control in injection molding machines

Alternating pQ control is a proven closed-loop technology used in high-performance hydraulic injection molding machines. It is typically implemented with:
  • A Servoproportional and high-performance directional valves
  • B Variable displacement axial piston pumps and servopumps
This control strategy allows dynamic switching between flow rate (Q) control and pressure (p) control within the same hydraulic circuit, depending on the injection phase.

Operating Principle

During the injection (filling) phase, the system operates in flow control mode, precisely regulating injection cylinder velocity to achieve the required speed profile.
When the mold cavity becomes full, the control algorithm automatically switches to pressure control mode for the holding/packing phase, maintaining the required force to compensate for material shrinkage.
The transition between Q-control and p-control is the most critical aspect and it is managed by a dedicated algorithm to ensure a smooth and stable changeover, avoiding pressure peaks or material overpacking.
The system operates in a closed loop, using pressure transducers installed at the injection cylinder ports, or directly in the mold cavity.

A - pQ directional valves for injection applications

High-performance directional valves, available in ISO sizes 06 to 35, cover flow rates up to 3500 l/min and operating pressures up to 350 bar. When equipped with W5 optimized control spools, these valves enable precise and stable pQ regulation throughout all phases of the injection cycle, including:
  • Plasticizing backpressure control
  • High-dynamic injection speed control
  • Pack and holding pressure regulation
The optimized spool shape ensures excellent metering resolution, fast dynamic response, and stable transition between flow and pressure control modes, which is a critical issue for product quality and repeatability.
Optional fieldbus interfaces CANopen, PROFIBUS DP, EtherCAT, POWERLINK, EtherNet/IP, and PROFINET enable real-time communication with the machine’s electrohydraulic control unit for valve control and diagnostics.

PQ directional valves key advantages include:
  • Enhanced process stability, especially in high-speed or thin-wall applications
  • System simplification, since the entire injection cycle is controlled by a single valve
  • Flexibility: since speed and pressure profiles can be easily optimized to different polymers and viscosity
High-performance-pQ-proportional-valve-for-injection-control
High-performance pQ proportional valve for injection control

B - Hydraulic power control in injection molding machines

PVPC axial piston pumps and SSP smart servopump systems provide an integrated solution that combines hydraulic power generation with accurate flow (Q) and pressure (p) control, enabling high-performance closed-loop operation which significantly improves dynamic response, process stability, and overall machine efficiency compared to traditional fixed-displacement systems.

PVPC-PERS are variable displacement axial piston pumps available in the range 29 to 160 cc / 350 bar, equipped with a digital pQ servoproportional pilot valve which actively operates the pump’s swash plate to alternately control in closed loop, through specific transducers, the displacement (flow) or the user line pressure.

PVPC-PERS pumps key advantages include:
  • Flow and pressure are directly regulated at the hydraulic power source, avoiding the installation of additional control valves
  • Reduced energy consumption through demand-driven flow regulation
  • Improved process repeatability
Variable-displacement-axial-piston-pump-with-integral-pQ-control
Variable displacement axial piston pump with integral pQ control
SSP smart servopump system combines an 8.7 to 100 kW high-efficiency servo motor, with a fixed displacement pump size 11 to 125 cc @ 330 bar, managed by proprietary software specifically developed for hydraulic axes control.

SSP Smart Servopump advanced Features:
  • Fast dynamic response during injection acceleration phases
  • Energy consumption reduced by 65%-80% compared with fixed displacement pump systems
  • Very low noise level

Advanced features offered by the software are:
  • Smart Start-up: a guided and intuitive commissioning wizard that simplifies installation and reduces setup time
  • Autotuning, self-parameterization of control loops to achieve optimal dynamic response, ensuring high accuracy and stability during pressure-controlled phases such as pack and hold
Smart-servopump-system-combining-high-efficiency-motor-and-hydraulic-pump-for-dynamic-flow-and-pressure
closed-loop control
Smart servopump system combining
high-efficiency motor and hydraulic pump for dynamic flow and pressure closed-loop control
Contact us
Are you interested in Atos digital electrohydraulics for controlling the injection cylinder in plastics machinery?
Do not hesitate to contact us!
Follow us on LinkedIn to stay updated on our activities and products.
Source: PR22