Configurator

Go to catalog

CN

Round heads with counterflanges to ISO 6020-1, nominal pressure 160 bar, max 250 bar

Technical info

Hide or show technical insights to lead user in selection

General
Required
Bore size (mm)
Rod diameter (mm)
image

For strokes shorter than minimum stroke, the configured cylinder is automatically equipped with a spacer, minimum length 50 mm. Spacers length selection will be available in subsequent configuration steps.
image

For strokes shorter than minimum stroke, the configured cylinder is automatically equipped with a spacer, minimum length 50 mm. Spacers length selection will be available in subsequent configuration steps.
image
Please select a value between the range
Select a value between 0 and 5000 and confirm to continue
Mounting style
Basic execution
Mounting style
Front round flange (Ref. ISO MF3)
Mounting style
Rear round flange (Ref. ISO MF4)
Fixed clevis (Ref. ISO MP1)
Mounting style
Fixed eye (Ref. ISO MP3)
Mounting style
Feet (Ref. ISO MS2)
Front trunnion (Ref. ISO MT1)
Rear trunnion (Ref. ISO MT2)
Mounting style
Intermediate trunnion (Ref. ISO MT4)
Mounting style
Front flange (Ref. ISO ME5)
Mounting style
Rear flange (Ref. ISO ME6)
Mounting style
Fixed eye with spherical bearing (Ref. ISO MP5)
Threaded holes with tie rods extended (Ref. ISO MX7)
Rear the rods extended (Ref. ISO MX2)
Both end tie rods extended (Ref. ISO MX1)
Front tie rods extended (Ref. ISO MX3)
Front theaded holes (Ref. ISO MX5)
image

Cushionings’ profiles are designed to reduce the cylinder speed before the rod contacts the mechanical stroke-end, dissipating the energy with limited pressure spikes. These hydraulic dampers also reduce mechanical shocks. The adjustable versions are equipped with cartridge valves to increase max damping energy extracted from cushionings chart in table B015 (section 7.5) or to optimize the cushioning performances in different applications.

Cushionings’ profiles are designed to reduce the cylinder speed before the rod contacts the mechanical stroke-end, dissipating the energy with limited pressure spikes. These hydraulic dampers also reduce mechanical shocks. The adjustable versions are equipped with cartridge valves to increase max damping energy extracted from cushionings chart in table B015 (section 7.5) or to optimize the cushioning performances in different applications.
Cushionings
Without cushionings
Cushionings
Rear adjustable
Cushionings
Front adjustable
Cushionings
Front and rear adjustable
Cushionings
Rear fixed
Cushionings
Front fixed
Cushionings
Front and rear fixed
image

The spacers increase the rod and piston guide to protect them from overloads and premature wear, they are recommended for strokes longer than 1000 mm in pushing working condition.
The overall dimension of the cylinder increases by a value equal to the length of the spacers.
For strokes longer than 3000 mm is recommended to contact our technical office.
Spacers are mandatory for strokes shorter than the minimum values for mounting style “L”.

The spacers increase the rod and piston guide to protect them from overloads and premature wear, they are recommended for strokes longer than 1000 mm in pushing working condition.
The overall dimension of the cylinder increases by a value equal to the length of the spacers.
For strokes longer than 3000 mm is recommended to contact our technical office.
Spacers are mandatory for strokes shorter than the minimum values for mounting style “L”.
Spacers
Without spacers
25 mm
Spacers
50 mm
Stroke: 1001 ÷ 1500
Spacers
100 mm
Stroke: 1501 ÷ 2000
Spacers
150 mm
Stroke: 2001 ÷ 2500
Spacers
200 mm
Stroke: 2501 ÷ 3000
Sealing system
FKM + PTFE

High temperatures
Speed max: 4 m/s
Temp.: -20°C/+120°C
Fluids: HH, HL, HM, HV,
HFC, HFDR
Sealing system
NBR + PTFE

High speed
Speed max: 4 m/s
Temp.: -20°C/+85°C
Fluids: HH, HL, HM, HV,
HFC, HFDU
Sealing system
NBR + PTFE +
POLYURETHANE

Low friction
Speed max: 0,5 m/s
Temp.: -20°C/+85°C
Fluids: HH, HL, HM, HV
image
image
Oil ports
Standard oil ports
Oil ports
Front oversized port
Oil ports
Rear oversized port
Oil ports
Front and rear oversized ports
Rod treatment
Chrome
NSS 200h rating 10
Hardness:
• Plating 850 ÷ 1150 HV
• Rod 20 ÷ 25 HRC (~250 HV)
Rod treatment
Nickel – Chrome
NSS 1.000h rating 10
Hardness:
• Plating 850 ÷ 1150 HV
• Rod 20 ÷ 25 HRC (~250 HV)
Rod treatment
Chrome hardened
NSS 200h rating 10
Hardness:
• Plating 850 ÷ 1150 HV
• Rod 56 ÷ 60 HRC (~700 HV)
image

The air bleed screws allow to remove the air from the hydraulic circuit in order to avoid unwanted noise or vibrations which could cause irregular cylinder’s motion.

The air bleed screws allow to remove the air from the hydraulic circuit in order to avoid unwanted noise or vibrations which could cause irregular cylinder’s motion.
Air bleeds
Without air bleeds
Air bleeds
Front air bleed
Air bleeds
Rear air bleed
Air bleeds
Front and rear air bleeds
Front Head - Oil port position
SIDE 1 - Base version
Front Head - Cushioning adjustment position
Without Front Cushioning
SIDE 1
SIDE 2
Front Head - Cushioning adjustment position
SIDE 3 - Base version
SIDE 4
Rear Head - Oil port position
SIDE 1 - Base version
Rear Head - Cushioning adjustment position
Without Rear Cushioning
SIDE 1
SIDE 2
Rear Head - Cushioning adjustment position
SIDE 3 - Base version
SIDE 4
Please select a value between the range
Select a value between 0 and 5366 and confirm to continue
image
image
SAE Flange
Without SAE flange
SAE Flange
Front and rear SAE 3000 flange ports
Go to catalog

Product Code